High Quality Graver Helper Pneumatic engraving machine with Two Handpieces Jewelry Tools & Equipment 110V/220V
Shipping calculated at checkout.
- Jewelry Pneumatic Engraver GraverMax Double Ended Main Parameters: Voltage:220V/110V,50/60Hz, Power: 60W, Air Pressure:0~3kg/c, Rotate Speed: 100~4000RPM, Dimension: 260x210x250mm, Packing Size: 315x27x250mm, Weight: 8.0kg, Accessories: 2 pieces Handpieces, 1 piece Foot Control, Cables.
- 1. Size carved handle Foot opening panel interface connector. 2. The air compressor trachea insert air intake on the back of the engraving machine, it is recommended that the installation of relief valves and water separation filter, air compressor and engraving machine pipeline to increase machine performance. Methods of operation: 1: The first pressure adjustment knob and rotate the handle switch shut down to avoid the pressure too great damage to the pressure in the table and the pressure relief valve 2: power, turn on the power switch (Light). 3: the position of the changeover switch is set to 1 or 2 4: adjust the air pressure and speed, hand carved handle by stepping foot switch to adjust the pressure knob slowly Pressure gauge indicates of 1.5 ~ 2KG / CM2, adjust the speed knob at the same time, the combination of the two regulation carving handle. the biggest impact, pressure adjustment knob is pressed. 5 the relaxing foot switch, carving the handle to stop working, as shown below loaded tool! 6: size carved handle switch, turn the the conversion handle set and 2 and 1osition (should go to bits) 7 rotary engraving handle work, turn off the power switch, open the rotating handle switch, adjust the pressure knob. 8 hours of work with the footswitch opening increases smooth small to large control impact Maintenance: 1 engraving machine used for a period of time, it should be the back of the machine reducing valve cups drained. 2 to mechanical oil adding an appropriate amount of the 10th size carved handle! 3 If the fault, not blindly demolished, the staff checks and maintenance.
- 1. Global transportation. (Except for some countries and APO/FPO)
- 2. Process the order in time after confirming the payment.
- 3. We only ship to the confirmed order address. Your order address needs to match your shipping address.
- 4. The service transit time is provided by the carrier, excluding weekends and holidays. Shipping time may vary, especially during holidays
- 5. If you have not received the shipment within 3 weeks after payment, please contact us. We will track the shipment and get back to you as soon as possible. Our goal is customer satisfaction!
- 6. Due to the stock situation and time difference, we will choose to ship from our first available warehouse for fast delivery.
- 1. A 12-month manufacturer's limited warranty on defective items (state the reason for equipment repair).
- 2. Defective items need to be reported and returned within the warranty period. You need to tell us what the defect is and provide us with your order
- 1. From the date of receipt, you have 7 days to contact us and return it within 30 days. If it is determined that it is indeed a product problem, the return shipping fee will be borne by the seller (if there are other reasons, please specify).
- 2. All returned items must be packaged intact to prevent secondary damage, and you need to provide us with the shipping tracking number, the specific reason for the return and your purchase order number.
- 3. After receiving the packaged items, including all components and accessories, we will refund your full amount.