PHYHOO Pneumatic Engraving Machine GraverMate Jewelry Engraver Single working handle Metal Jewelry making equipment


  • $218.00
    Unit price per 
Shipping calculated at checkout.

  • 1. Turn off the pressure regulator to rotate and rotate the handle to avoid too much pressure switches, pressure gauges and pressure valve damage
  • 2. Turn on the power, turn on the power switch (lights)
  • 3. hand side reel handle, moving the foot switch pedal to the maximum pressure is rotated to adjust the maximum impact force, press the knob to adjust the pressure, while working at any footswitch opening increases, can smoothly control the impact of small to large
  • 4. Load the reel handle lock knife edge can be used.
  • 5. The need to exchange the same operation with carved handle both
  • 6. The need to handle with rotating sculpture, turn off the power switch to adjust the pressure knob (when the foot switch has no effect)
  • 1.Input voltage:110v/220v
  • 2.Power:80W
  • 3.Speed: 1400rpm/min
  • 4.Air pressure:0~3KG/CM2
  • 1. The valve periodically drained
  • 2. Regularly adding an appropriate amount of No. 10 machine oil in the reel side handle
  • 3. If the fault should not blindly disassemble, inspect repair professionals.
  • V/W:7.5kg

    Click to edit the product in Ali Orders.
    Note: only show for shop owner